Opis

Powerful, user-friendly and practical charger with integrated balancer, it is suitable for Lipo and LiFePo batteries with two (7.4V) or three (11.1V) cells. The batteries are charged very reliably and safely, the installed 12 bit microprocessor monitors the charge and prevents overcharging and short circuits. The charging current can be set to 0.5 ampere, 1 ampere and 2 ampere, whereby 0.5 ampere in particular is most gentle on the battery. The 2 ampère charging current should only be used for batteries with at least 2000mAh capacity. The charger automatically detects when the battery is full and then stops the charging process, the device then maintains the voltage and signals acoustically and visually that the battery is full.

Important notes for the operation of the charger:

• First the charger must be plugged into the socket.
• Then the correct mode (Lifepo for Lifepo batteries and Lipo for Lipo batteries) must be selected.
• Then the number of cells is selected (7.4V = 2 cells, 9.9V and 11.1V = 3 cells)
• Then the battery is connected to the device
• Then Start is pressed for approx. 2 seconds, the charging process begins
• After the charger signals that the battery is charged, the battery is removed from the charger
• Only then is the charger disconnected from the socket.